Bridge cranes generally consist of bridge frames (also called carts). It consists of lifting mechanism, trolley, trolley transfer mechanism, control room, trolley conductive device (auxiliary slide line), crane total power supply conductive device (main slide line) and other parts.The trolley is pla

The task of the operating mechanism is to make the crane or trolley move horizontally to carry goods or adjust the working position. At the same time, it can transfer the load acting on the single beam bridge crane or trolley to the foundation supporting them. The operation mechanism of the land cra

Now with the development of industry, the application of electric hoist in the society is becoming more and more widespread, which greatly facilitates people's life and work. As one of many crane brands, electric hoist cranes have excellent performance in all aspects and are in the industry Has a go

After the crane has been used for a long time, various problems of its bearings will gradually appear. One of the intuitive problems is the occurrence of corrosion, especially for those cranes that have been used outdoors for a long time. But the bearing is very important for the whole crane, so its

When the crane is in operation, people must effectively control all aspects of it in order to complete the safe and stable tasks. For different types of cranes, the corresponding controllable points are different. How does the bridge crane define this aspect?The system control of the bridge crane in

1. motor, reducer maintenanceAlways check the temperature of the motor casing and bearing parts, the noise of the motor, and the vibration.In the case of frequent starting, the ventilation cooling capacity is reduced due to the low speed, and the current is large, the motor temperature rise will inc

As a necessary device in the bridge crane, the speed of the installation will directly affect the operation status of the entire lifting equipment. For the installation of the reducer in the bridge crane, the first thing to be determined is that it is installed. It is determined by the structure and

1. When the driver takes over, check the brakes, hooks, wire ropes and safety equipment. When the function is found to be abnormal, it should be excluded before operation.2. Before you drive, you must ring or alarm. Intermittent ring tones or alarms should also be given when approaching people in op

Since many users have little knowledge of the storage and storage of cranes, the cranes have suffered varying degrees of damage even during periods of inactivity. This once again reminds the users that scientific and reasonable storage and maintenance is also very important for the crane.The first t