There are many accessories for cranes, and all these accessories need to be checked before use to troubleshoot and ensure safety. However, the method and process of inspecting the faults of different parts of the crane are different. During the inspection, carefully check according to the characteri

After the crane has been used for a long time, various problems of its bearings will gradually appear. One of the intuitive problems is the occurrence of corrosion, especially for those cranes that have been used outdoors for a long time. But the bearing is very important for the whole crane, so its

When the crane is in operation, people must effectively control all aspects of it in order to complete the safe and stable tasks. For different types of cranes, the corresponding controllable points are different. How does the bridge crane define this aspect?The system control of the bridge crane in

1. motor, reducer maintenanceAlways check the temperature of the motor casing and bearing parts, the noise of the motor, and the vibration.In the case of frequent starting, the ventilation cooling capacity is reduced due to the low speed, and the current is large, the motor temperature rise will inc

As a necessary device in the bridge crane, the speed of the installation will directly affect the operation status of the entire lifting equipment. For the installation of the reducer in the bridge crane, the first thing to be determined is that it is installed. It is determined by the structure and

Before the bridge crane is driven, the hooks, wire ropes, safety devices and other components should be inspected according to the requirements of the check card. If abnormal conditions are found, they need to be excluded. Ground-operated single-girder bridge cranes, each class should have a person