EA Round Lifting Belt
The maximum load of the circular lifting belt is 3000T, the efficient length is up to 100M, the safety factor is 6:1 and 7:1 .
The circular lifting belt is made from high strength polyester industrial long string(100%PES), the internal bearing core is infinite surround for forming the circle load, the external bearing core is using 100%PE for weaving non-force annular tubes on a aim of protecting the bearing core.
Parameter of EA round lifting belt: Model | Min Breaking load(kg) | Rated Working Load(kg) | Upright P=1(kg) | Choked P=0.8(kg) | Angle45° P=1.8(kg) | Angle90° P=1.4(kg) |
EA-01 | 6000 | 1000 | 1000 | 800 | 1800 | 1400 |
EA-02 | 12000 | 2000 | 2000 | 1600 | 3600 | 2800 |
EA-03 | 18000 | 3000 | 3000 | 2400 | 5400 | 4200 |
EA-04 | 24000 | 4000 | 4000 | 3200 | 7200 | 5600 |
EA-05 | 30000 | 5000 | 5000 | 4000 | 9900 | 7000 |
EA-06 | 36000 | 6000 | 6000 | 4800 | 10800 | 8400 |
EA-07 | 48000 | 8000 | 8000 | 6400 | 14400 | 11200 |
EA-08 | 60000 | 10000 | 10000 | 8000 | 18000 | 14000 |
EA-300 | 1800000 | 300000 | 300000 | 240000 | 540000 | 420000 |
The maintenance for the lifting belt is flexible, the damage issues are very common when operates the lifting due to crash. But the EA type lifting belt can just be crashed into the flat shape, thus the dangerous is zero. Even if the lifting belt was damaged seriously, the circular tube broken first, then the bearing core exposed to outside. This means the lifting belt was damaged. The repeat test shows that the internal of the belt is not being damaged if the outside tube is intact. At the meantime, if the internal bearing string bunch is broken, it will be found through the circular tube. The tube can be protected with a if there is cut damage in avoiding the further breaching. Check carefully and confirm there is no damage in internal before continuous using. But the large cutting damage must be checked by us for confirming if it can be used continuously.
If any questions, please do not hesitate to contact us.
Please advise below information, thanks! 1.What is the WLL (Working load limit)?
2.What is the Length (1-100m)?
3.What is the safety factor (our standard is 7:1,6:1,5:1)?
4.What is the quantity?
5.What is the width?
6.What is the color you need?