Views: 0 Author: Site Editor Publish Time: 2020-11-05 Origin: Site
One of the operating regulations of the wire rope electric hoist is “no slanted pulling and oblique hoisting”, but in the actual hoisting process, due to the quality of the construction personnel or objective conditions, the phenomenon of slanted pulling and oblique hanging is widespread. Once this happens, it is easy to cause damage to the wire rope electric hoist. In the light of the replacement of the wire arranging device, the wire rope is scrapped, and the whole electric hoist is scrapped or personal injury is caused, which causes a certain economic loss and seriously affects the construction and production.
The crooked pulling and oblique hanging of the wire rope electric hoist can be prevented. A device for preventing crooked pulling and oblique hanging can be designed. This device uses the wire rope to produce a certain deflection angle when the wire rope is hoisted, so as to limit the installation on the electric hoist. This set of equipment not only has the function of preventing skewing and oblique crane, but also has the function of height limit. After practical use, it has many effects and high reliability. It can place skewed and oblique crane.
In addition, if you want to prevent the phenomenon of crooked pulling and oblique hanging in the use of wire rope electric hoists, you should start with the use, strictly abide by the basic principle of "vertical lifting", strictly require the operator, and improve the professional level of the operator.